Filter By:
- Parts & Accessories (95)
- Pedals (201)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Pedals
$52.25
Different rides call for different footwear, which is why MSW's CP-100 Platform and Clipless pedals accommodate any shoes you've got. On one side, you've got a stable, wide platform to accommodate street shoes, and on the other, you've got an SPD-style clipless pedal that accommodates your favorite mountain bike shoes. The spring tension on the clipless side is adjustable so you can customize how much pressure it takes to unclip. On the trail or on the pavement, the CP-100 is a versatile, stable platform.
$50.00
The TRAIL FUSION pedals give you superior control of your mountain bike and far greater performance than traditional flat pedals. Their wide composite platform offers increased stability, better power transmission and ultimate comfort, allowing you to pedal with confidence and get the most out of your ride. And worry no longer when the trail gets technical: each pedal face features eight replaceable pins for maximum grip. Customize your look with one of the 5 available colors and forget your limits out on the trail!
$30.00
- Classic BMX-style platform pedal for all-around use across varied disciplines
- Impact grade Nylon construction with in-molded surface pegs (10 per side) for superior traction and longevity compared to cheaper polycarbonate alternatives
- 22.5mm height/105mm width
- CrMo spindle axle with a serviceable loose-ball bearing system for easy maintenance
- Design compatible with most foot-retention strap systems including Gates Straps (available separately)
- Weight: 405g
$40.00
Replace worn-out spindles or customize your stance width, with these kits for iSSi Road pedals.
- Chromoly spindles
- Sealed cartridge bearing and bushing in an alloy cartridge
- Compatible only with iSSi Road pedals
- Installs with iSSi Road spindle tool (TL5499)
- Pedal Spindle: 9/16"
- Spindle Material: Chromoly Steel
$50.00
Replace or overhaul iSSi pedals with Bushing & Bearing Spindles with these handy kits, or customize your stance width with longer spindle options.
Includes:
- iSSi chromoly spindles
- Sealed cartridge outer bearings
- Inner Bushings
- Spindle nuts
- Seals
- iSSi-branded end caps
$17.00
- Extend the life of your iSSi Thump pedals by replacing beat-up or missing pins with the Thump Replaceable Pin Kit.
- Includes 36 steel pins and 2mm spacers to replace both sides of two pedals
- The standard pin height out of the box is 3mm with a 2mm spacer. For more traction, remove the spacer under the pin head to increase pin height to 5mm.
$54.95
e*thirteen's Base pedal features a durable composite pedal body and 22 traction pins.
- Durable composite pedal body
- 22 traction pins
- 9/16"
$25.00
Xpedo XPR cleat set for R-FORCE 6 is an SPD style cleat specifically designed for 3-hole road shoes.
- Weight: 135g per set with hardware
- Float: 6°
$119.00
The Baldwin offers the best of both worlds, bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support.
- Weight: 332g CrMo
- Body: 60661 CNC AL
- Spindle: Cromoly
- Bearings: 3 Cartridge
- Springs: SWP
- Cleat: XPEDO XPT (6° Float)
$189.00
The Baldwin offers the best of both worlds bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support.
- Weight: 292g Ti
- Body: 60661 CNC AL
- Spindle: Titanium
- Bearings: 3 Cartridge
- Springs: SWP
- Cleat: XPEDO XPT (6° Float)
*Titanium spindles have 180lbs weight limit.
$169.00
Xpedo's designers went back to the drawing board for the GFX to create a fresh new design to meet the demands of the evolving downhill racing styles. The latitude entry system allows rapid engagement in any condition, positioning the front claw upwards for intuitive, seamless contact with the pedal. The Posi-Fit retention system is fully adjustable for fine-tuning the entry and release. The low-profile 6061 CNC body with adjustable height pins provide traction and support with any style of shoes. Tapered cromoly spindles roll on three precision cartridge bearings for easy maintenance. Wider Q-factor allows ample clearance between shoe and crankarm.
- Weight: 468g CrMo
- Body: 60661 CNC AL
- Spindle: Cromoly
- Bearings: 3 Cartridge
- Springs: SWP
- Pins: 16 adjustable height grub pins per pair
- Cleat: XPEDO XPT (6° Float)
$199.95
Wolf Tooth Ripsaw Aluminum Pedals feature a slim, lightweight design with a slight convex profile. The large, asymmetric machined aluminum platform provides strong foot support for all-mountain riding, while the thin convex profile is just 7mm thick at the leading edge. Inside the pedal are three fully sealed cartridge bearings, a stainless steel axle, a igus bushing, and a custom radial seal to protect internal components against trail debris.
Slim Convex Profile
Ripsaw pedals are 12.5mm thick in the center and just 7mm thick in the front and rear edges. This profile is supportive and comfortable for all riders, while performing exceptionally well for riders who prefer pedaling with a mid-foot position or for shoes that do not have much structure or support.
Extra Grip
Each side of the pedal has 12 stainless steel rear-loading 4.5mm pins for loads of traction. An additional six 4.5mm pins ship with the pedal. Shorter 3mm pins are available as replacement parts to customize the convexity of the pedal; by installing shorter pins on the edges, the convex profile is emphasized.
Formed with Purpose
The slight convex profile of the pedal body is tallest at the pedal spindle. The shape then tapers toward each edge from there. This profile aligns perfectly with the arch of your foot and provides a strong platform for power transfer.
Reliable Performance
Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions.
Precision Machining
Each Ripsaw Aluminum Pedal body begins as a billet of raw aluminum. After 37 minutes in our CNC mills, the result is a beautifully crafted pedal body that is ready for anodizing and assembly. If you’re a nerd for machining, you’ll appreciate the intricate gradients and machine paths.
$199.95
Wolf Tooth Waveform Aluminum Pedals are designed for all-mountain riding, from XC to downhill. They are engineered to lock in your foot with a shape that matches your shoe, rear-loading pins for grip, and a dual-concave profile to further cradle your feet. The pedals come in two sizes, and are proportionally scaled to provide a supportive platform shaped to match the footprint of your shoe. Large is 112mm x 106mm, small is 105mm x 99mm.
Dual-Concave Profile:
- Waveform pedals are 14mm thick on the perimeter and just 12.5mm thick in the center. This profile cradles your foot, front to back and side to side.
Extra Grip:
- Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. An additional six pins ship with each set of pedals and they are available as replacement parts.
Shaped with Purpose:
- The shape of Waveform Aluminum Pedals matches the footprint of your shoe
Reliable Performance:
- Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions.
Tapered Edges:
- Large, tapered leading edge to deflect pedal strikes on rocky, rooty terrain
Two sizes:
- Large: 112mm x 106mm - 384g
- Small: 105mm x 99mm - 373g
Each size is proportionally scaled to match the silhouette of your shoe based on foot size or pedal size preference.
$3.95
- Protects cranks from damage caused by overtightening pedals
- Can be used for bike fit adjustments, dependent on pedal thread length engagement
$17.10
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.
$39.95
Wellgo WPD-823 Clipless Mountain Pedals.
- Includes 98A cleats, Shimano SM-51 compatible
- Dual-spring release/entry tension adjustment
- Four degrees of Rotation
- 9/16"
$64.00
Velo Orange Pedals
- Extruded and CNC-machined aluminum, sandblasted silver finish
- 90 x 60mm platform with two replaceable pins on each side
- Toe-clip compatible
- 9/16"
$60.00
Lots of foot-huggin' lovin and a natural connection to your bike...that's what you get from VP’s all new, dual-concave platform design. VP-Aim was developed with input from both top free riders and local soul riders to deliver the right feeling of control and security at the right price. It’s still thin, it’s still stylish, and it can take all the beating that you can give it and keep rolling on.
- 105 x105 x18mm platform
- 9/16"
$80.00
VP's Flat Pedals combine wide platforms and a great grip for excellent stability with extruded and CNC-machined aluminum bodies for light weight and a rainbow of colors for high style. You also get tough chromoly axles and sealed bearings for durability.
- 345 grams
- 9/16" axles
$22.00
VP's Split Cleats boast super-smooth and easy entry/exit into your clipless pedals, excellent durability and maximum power transfer. They're made of a tough and light composite material, are compatible with VP and Look Keo pedals (pedals sold separately) and even have areas that grip for walking traction. That's all great, but what really sets the Split Cleats apart is how easily and accurately they can be replaced when they wear out. The cleats split in half so that you simply remove each half and use the half still on the shoe to ensure perfect cleat placement every time! With these cleats you'll never have to fuss around trying to get your new cleats in the right place again and it only takes a minute or two to replace cleats, too. Genius! The Split Cleats are available in 2 models, one with 7 degrees of lateral float for your feet and one that's fixed (no float).
- Fits VP and Look Keo pedals (pedals sold separately)
$50.00
VP's Vex Pedals are incredible workhorses with sturdy, large platforms and a dual-concave design with pins for an awesome grip. They're also light making them ideal for mountain biking, freeriding, BMX and even city riding. They're built to last, too, with cast-aluminum bodies, tough forged, heat-treated and CNC-machined chromoly axles and quality sealed bearings.
- 385 grams
- 9/16 axle
$103.99
VP's Vice pedals are nice, flat pedals that perform and look great. They have large platforms and are low-profile reducing impacts with rocks and roots if you use them off-road (they're perfect for BMX and other bikes, too). They have 12 pins per side so they grip no matter what, and they feature extruded/CNC-machined aluminum bodies with heat-treated chromoly axles and sealed bearings for durability.
- 406 grams
- 9/16" axles
$25.00
An extremely low-profile composite pedal that can handle just about any type of riding.
- Ultra-durable composite body
- Low-profile body in a slim-lined platform dimension
- 2DU Bushing System with low-friction coating
- Boron axles
- 12 molded traction pins
- Pedal body dimensions: 95 x 72 x 25mm (LxWxH)
- 9/16"
$30.00
Alloy pedals with a smaller platform that is ideal for smaller sized shoes and offers ample ground and cornering clearance.
- 6061-T6 die-cast alloy body construction
- 2DU Bushing System with low-friction coating
- Boron axles
- 14 removable traction pins per pedal
- Pedal body dimensions: 105 x 93 x 25mm (LxWxH)
- 9/16"
$23.00
- The ATAC 13/17° cleat works with all TIME mountain pedals.
- Included with all mountain pedal models numbered "6" and higher
- Release angles of 13 degrees or 17 degrees depending on how the cleat is set up on the shoe
- Compatible with all two-hole cycling shoes.
$106.00
- Built with an aluminum body and oversized axle to handle the roughest trail conditions and biggest descents.
- TIME's famous easy entry and exit system allows riders to easily put a foot down when needed and clip back in fast.
- The open, self-cleaning design keeps the pedal clean so its function is not compromised by dirt, debris, or mud.
Specs:
- Pedal Material: Aluminum
- Pedal Weight: 238g
- Cleat Compatibility: ATAC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16"
$23.00
- The ATAC EASY 10° cleat works with all TIME mountain pedals.
- Included with mountain pedal models numbered "2" and "4."
- Release angle of 10 degrees and is compatible with all two-hole cycling shoes.
- Don't let the "Easy" name fool you. If you are a high-performance rider looking to reduce the release angle from our 17 or 13 degrees, this is the choice for you.
$23.00
- Works with all XPRO and XPRESSO pedals.
- Not included with new XPRO and XPRESSO pedals.
- This is a zero-float cleat design, so there are zero (0) degrees of heel float and no lateral float along the pedal axle.
- Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.
$23.00
- Developed for the TIME XPRO & XPRESSO road bike pedal range.
- They allow angular and lateral freedom in order to respect the natural movements of your legs and joints.
- You can also adjust the Q-factor (by switching the cleats)
- The Bi-material brings more durability when walking with the cleats.
- These cleats are the stock cleats included with all XPRO & XPRESSO pedals.
Page 1 of 10
Next page